Specialty media – Tektronix PHASER 780 User Manual
Page 16
14
Specialty Media
1
Load specialty media in the multi-purpose tray (the external
tray on the right side of the printer).
2
Set the paper guide toward the rear of the tray. Extend the
tray for large-format paper.
3
Insert the media
face up.
Load large-format media short
edge first; load letter/A4 media long edge first. Readjust the
paper guide.
4
At the printer’s front panel:
a
The front panel displays
Multi-Purpose Tray
Media Size
and the current default. If the correct
size is shown, press
Select
. Otherwise, press
until you come to the correct size, then press
Select
.
b
At the
Multi-Purpose Tray Media Type
prompt, press
Select
if the correct type is
shown. Otherwise, to make a new selection,
press
and then
Select
.
5
From your application’s
menu, select
Multi-Purpose
Tray.
Click
Print.
Duplex printing (printing on both sides) is not recommended.
Reduced image quality may result.
1
2
3
4
3040-10
Multi–Purpose Tray Media Size
Letter
Select