Transparencies – Tektronix PHASER 780 User Manual
Page 17
15
Transparencies
1
Look for the notch on Tektronix transparencies (A/A4,
Tabloid Extra). Load transparencies as follows:
■
Multi-purpose tray:
with the notch
opposite
the leading edge, toward the
rear
of the printer
■
Optional transparency tray (A/A4 only):
with the notch at the
left rear
of the tray
2
If using the multi-purpose tray:
a
The front panel displays
Multi-Purpose Tray
Media Size
and the current default. Press
until
the correct size is displayed. Press
Select
.
b
When the
Media Type
prompt appears, press
until
Transparency
is displayed. Press
Select.
3
From your application’s
menu, select
Multi-Purpose
Tray
or
Transparency,
depending on which tray you are
using. Click
.
For best results, use only Tektronix transparencies.
To avoid jamming the printer, feed oversize transparencies one
sheet at a time in the multi-purpose tray only.
Capacity: A/A4 50 sheets
Tabloid Extra: 1 sheet
Capacity: A/A4 100 sheets
(Transparency tray only)
3040-45
3040-42