Text goes here, Command reference - xstatus – TANDBERG D14049.01 User Manual
Page 158
D 14049.01
07.2007
58
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Command Reference - xStatus
IP:
Protocol: <IPv4/IPv6/Both>
IPv4:
Address: <IPv4Addr>
SubnetMask: <IPv4Addr>
Gateway: <IPv4Addr>
IPv6:
Address: <IPv6Addr>
Gateway: <IPv6Addr>
DNS:
Server [1-5]:
Address: <IPv4Addr/IPv6Addr>
Domain: <S: 0, 128>
NTP:
Status: <Inactive/Active/Failed>
Cause: {Visible if status is Failed} <No response from NTP server/ DNS resolution failed
Address: <IPv4Addr/IPv6Addr>
Port: <1..65534>
Last Update: <date-time>
Last Correction: <Time in seconds, precision in seconds>
LDAP:
Status: <Inactive/Initializing/Active/Failed>
Cause: {Visible if status is Failed} <Failed to connect to LDAP server/ Failed to negotiate TLS with LDAP server/ Failed to perform TLS handshake with LDAP server/ Failed to authenticate with LDAP
server/ DNS resolution failed>
Address: <IPv4Addr/IPv6Addr>
Port: <1..65534>