Text goes here, Command reference - xstatus – TANDBERG D14049.01 User Manual
Page 163
D 14049.01
07.2007
63
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Command Reference - xStatus
Zones continued...
Bandwidth:
Used: <0..100000000>
Registrations: {0..3750 entries}
Registration: <1..3750>
SerialNumber: <S: 1,255>
Calls:
Call [0..900]: {0..900 entries}
CallSerialNumber: <S: 1,255>
Searches:
Current:
Total:
Dropped:
Zone [1..200]:
Name: <S: 1,50 Node name>
Status: <Active/Failed/Warning>
Cause: {Visible if status is Failed or Warning} <No gatekeeper reachable/ Gatekeepers unreachable>
Type: <Neighbor/TraversalClient/TraversalServer/ENUM/DNS>
Neighbor: {Visible if Type is Neighbor}
Primary:
H323: {Visible if H323 Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {Visible if Status is Failed} <No response from neighbor/ DNS resolution failed>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
SIP: {Visible if SIP Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {Visible if Status is Failed} <No response from neighbor/ DNS resolution failed>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
Alternate [1..5]: