Configuring ldap server settings, Configure the ldap server, Text goes here – TANDBERG D14049.01 User Manual
Page 43: Registration control
D 14049.01
07.2007
43
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Authentication
Server IP address
The IP address or FQDN of the LDAP server.
Port
The IP port of the LDAP server.
UserDN
The user distinguished name to be used by
the VCS when binding to the LDAP server.
Password
The password to be used by the VCS when
binding to the LDAP server.
Base DN
The area of the directory on the LDAP server
to be searched for the credential information.
This should be specified as the Distinguished
Name (DN) in the LDAP directory under which
the H.350 objects reside.
Alias origin
Determines the source of the alias(es) with
which the endpoint will be registered.
LDAP
: The aliases listed in the LDAP database
for the endpoint’s username will be used;
those presented by the endpoint will be
ignored.
Endpoint
: The aliases presented by the
endpoint will be used; any in the LDAP
database will be ignored.
Combined
: The endpoint will be registered
both with the aliases which it has presented
and with those configured in the LDAP
database.
The default is
LDAP
.
Encryption
Determines whether the connection to the
LDAP server will be encrypted. (For more
information on configuring encryption, see
Securing the LDAP connection with TLS
.)
TLS
: TLS Encryption will be used for the
connection with the LDAP server.
Off
: No encryption will be used.
The default is
Off
.
Registration Control
Configuring LDAP Server settings
To configure the settings for accessing the
LDAP server:
VCS Configuration > Authentication > LDAP
> Configuration.
You will be taken to the
LDAP Configuration
page.
xConfiguration LDAP
xConfiguration Authentication
•
•
•