Toshiba IK-TF7 - Manual (Page 8)

8
5. CONNECTION
5. 1 Standard Connection
5. 2 Cautions on Connection
• When connecting the camera cables, be sure to turn off the camera and the other equipment connected.
• We suggest using a C mount lens made for a 3CCD camera.
When using another lens, the best camera performance of this camera may not be obtained.
(For example, low resolution may occur, focus may be lost through the range of a zoom lens, and
flare, ghost or shading may occur)
Furthermore, in order to avoid damaging the mounting portion of the camera head, use a lens which
has projection dimension from the mounting base of less than 0.157"(4mm).
• For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA approved ungrounding
type AC adaptor with the specifications described below.
Power supply voltage : DC12V
±
10%
Current rating : More than 830 mA
Ripple voltage : Less than 50 mV(p–p)
Connector : HR10A–7P–4S by HIROSE electronics Co. Ltd
Pins 1, 2 : 12V
Pins 3, 4 : GND
5. 3 Connector Pin Assignments
IK-TF7
DC IN 12V
Lens
DC power supply
Less than 4 mm
DC IN 12V RGB
1 +12V 1
2 +12V 2
3 GND 3
4 GND 4
5
6
7
8
9
10
11
12
13
14
15
R
G
B
TXD
GND
GND
GND
SYNC
12V
GND
RXD
TRIG
HD IN/OUT
VD IN/OUT
INDEX
1
2
3
4
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15