Toshiba B-SX600 SERIES - Manual (Page 31)

3. MEDIA AND RIBBON
3- 5
3.5 Guaranteed Print Area
Printing must be performed within the shaded area as illustrated below.
If a printed image is placed outside this area, the loaded ribbon may be torn or the print quality may be
degraded.
1. Die-cut label
2. Notched media
B
A A
B
Media width
A ＝ 2 mm or over
B ＝ 1.5 mm (if a notch pitch is 100 mm or less)
B ＝ 2.5 mm (if a notch pitch is more than 100 mm)
B
B
A A
Label width
Media width
Label len
g
th
A ＝ 2 mm or over
B ＝ 1.5 mm (if a label length is 100 mm or less)
B ＝ 2.5 mm (if a label length is more than 100 mm)