Technicolor - Thomson CS1200VD - Manual (Page 3)

6 7
Getting Started Setup and Connections
EN EN
Overheating
• Do not block ventilation holes in any component.
Arrange the components so that air can circulate
freely.
• Do not stack components directly on top of each
other.
• Allow adequate ventilation when placing your
components in a stand.
• Place the receiver near the top shelf of the stand
so heated air rising from it will not affect other com-
ponents.
Disc Information
About CDR, CDRW, Audio mp3,
Compact Disk Audio (CDA), DVD
Video, DVD Audio
This model is compatible to play CDR,
CDRW, Audio mp3, Compact Disk Audio
(CDA), Video Compact Disk (VCD), JPEG pic-
tures.
While your disc player is compatible with
the largest number of discs possible, it can-
not be guaranteed that you will be able to
play discs which might not be compatible
with audio CD, VCD and DVD standards.
NOTES ON CD-R/RW
DISC
This unit is compatible with CD-RW/
CD-R discs for playback.
• Do not affix any type of labels to
either side (recordable or labeled side)
of a CD-R/RW disc as this may result in
the unit malfunctioning.
• Do not load an unrecorded CD-R/RW
disc into the unit. This may take a
longer time to read the disc.
• Playback capability for CD-RW
discs may vary due to variations in
the quality of the CD-RW disc and
the recorder used to create the
disc.
Playback capability of CD-R, DVD-R
and rewritable discs, compatibility
with this player depends on the
recorder, the burning software
and the disc used
ATTENTION
This unit is incompatible with the fol-
lowing disc formats:
DVD-ROM, DVD-RW, DVD+RW, DVD
RAM, DVD-R, CDV, SACD, DVD Audio
(High resolution tracks). Kodack disc,
Divx video disc, photo CD, CD-G, S-VCD,
Data part of CD Extra, disc with non
standard shape (e.g. heart), disc with
region code different from the one
specified on the back of the unit.
Receiver
TV
Subwoofer
R
L
SPEAKER IMPEDANCE 6
0
PHASE
180
FROM MAIN UNIT
IMPED A NCE: 6Ohm
RA TED POWER: 20W IMPED A NCE: 6Ohm
RA TED POWER: 20W
Front speaker right Front speaker left
AUDIO IN R L
S-VIDEO IN VIDEO IN
OPTICAL IN
Speakers and components connections
The following diagram shows how you can connect the speaker, and the way you connect
your DVD receiver to other components.
5.1 CH, DTS, AC3
receiver
Front speaker right Front speaker left
Subwoofer
At the first time you turn on your unit, you can select your desired On Screen Display language,
the procedures are as follow:
ATENTION: You cannot change this setting once you open the disc tray.
1. Turn on the TV with the unit connected.
2. Press SOURCE button to enter CD/DVD mode, use the UP/DOWN button to select English,
French or Spanish in the language menu.
3. Press OK to confirm.
CS1200VD EN PART 1 5/20/03 11:12 AM Page 10