Technicolor - Thomson CS1200VD - Manual (Page 7)

EN EN
DVD Menu System
Unlocking your DVD Player
1. If you’re playing a disc, press STOP (the DVD
Player’s main menu appears).
2. Press the down arrow button until Lock is high-
lighted, (the Enter Password screen appears).
3. Use the number buttons to enter the password
you created, and press OK (the Lock menu
items appear).
4. Press the down arrow button until Unlock play-
er is highlighted, and press OK. If asked, enter
your password to confirm that you want to
unlock the player (the screen goes back to the
Lock menu with the padlock icon unlocked to
indicate that the player is unlocked).
Changing Your Password
You can change your password, but the player must
be locked.
1.
If a disc is playing, press STOP (the main menu
appears).
2. Press the down the arrow button until Lock is
highlighted, and press OK. If asked, enter your
current password if asked (the Lock menu
items appear).
3. Press the down arrow button to highlight
Change Password, and press OK (the Enter
New Password screen appears).
4. Use the number buttons on the remote to
enter the four-digit number that you want to
use as your new password, and press OK (you
will be prompted to enter your new password
again to confirm). Enter your password, and
press OK.
DVD Menu System
Program Play
You must create your program (playlist) in the Edit
Program menu before you can access the Program
Play menu. By selecting Program Play in the Play
Mode menu you’re telling the DVD Player to play
the disc in the order you created in the Edit
Program menu.
Edit Program
1. If you’re playing a disc, press STOP (the main
menu appears).
2. Press the down arrow button to highlight Play
Mode, and press OK.
3. Press the down arrow button until EDIT PRO-
GRAM is highlighted, and press OK..
4. Use the number buttons on the remote con-
trol to enter the chapter (or track) you want
to play first.
5. Repeat step 4 until you’ve programmed all of
the chapters you want to play.
6. Press OK to start programmed playback.
7. To stop Program Play, press STOP twice. To
resume normal playback, press PLAY.
AutoPlay
You can set up the DVD Player so a disc automati-
cally starts playing whenever the disc tray is closed.
1.
If you’re playing a disc, press STOP (the main
menu appears).
2. Press the down arrow button to highlight Play
Mode, and press OK.
3. Press the down arrow button until AutoPlay is
highlighted. Press OK (On appears next to the
AutoPlay menu). To turn AutoPlay off, just
press OK again while AutoPlay is highlighted.
The Lock Menu
You can set up ratings limits and lock your player in
order to control the type of content people watch
on your DVD Player. The padlock icon on the Lock
menu indicates whether the player is locked or
unlocked.
Locked: You need to enter the password in
order to play discs that have a higher rating than
what you’ve allowed. When the player is locked,
nobody can access the Lock menu without entering
the password.
Unlocked: No password required to play discs.
Even if you’ve set ratings limits, they won’t be
enforced when the player is unlocked.
Locking your DVD Player
1. If you’re playing a disc, press STOP (the DVD
Player’s main menu appears).
2. Press the down arrow button until Lock is high-
lighted, and press OK (the Lock menu items
appear).
3. Since Lock Player is highlighted, just press the
OK button on the remote (the Enter Password
screen appears).
4. Use the number buttons on the remote control
to enter your password and press OK (Confirm
Password appears). Enter the same numbers you
entered before and press OK (you return to the
main menu with the lock icon locked to indicate
that the player is locked).
Once the player is locked, you’ll need to enter the
password everytime you access the Lock menu.
Note: The player is shipped without any. rating limits
set. You need to set Ratings Limits in order for the
player to prevent people from playing discs with cer-
tain ratings.
14 15
CS1200VD EN PART 1 5/20/03 11:12 AM Page 18