Technicolor - Thomson CS1200VD - Manual (Page 4)

8 9
EN EN
Main Unit Setup and Connections
Connection: DVD + TV
1. Connect the audio cables to the AUDIO OUT
jacks on the back of your DVD Player, and to the
corresponding Audio Input jacks on your TV.
2. Connect the video cable.
Basic video connection – Connect the video cable
(yellow) to the VIDEO OUT jack on the back of your
DVD receiver, and to the Video Input jack on your
TV.
S-Video (optional) – If your TV has an S-Video jack,
connect an S-Video cable (not provided) to the S-
VIDEO OUT jack on the back of your DVD Player
and to the S-VIDEO jack on your TV.
3. Connect the AC power cord into an AC outlet
.
Dolby Digital Manufactured under license
from Dolby Laboratories. “Dolby”, “Pro
Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
Copyright 1992-1997 Dolby Laboratories,
Inc. All Rights Reserved.
Manufactured under license
from Digital Theater Systems,
Inc. US Pat. No. 5,451,942,
5,956,674, 5,974,380,
5,978,762 and other world-
wide patents issued and pending. "DTS"
and "DTS Digital Surround" are regis-
tered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital
Theater Systems, Inc. All Rights Reserved.
Connection: DVD + TV + Audio
Receiver
Both Dolby Digital and DTS are audio formats used
to record 5.1-channel audio signals onto the digital
track of film (while the film is being made). Both of
these formats provide up to six separate channels:
left, right, center, left rear, right rear, and common
subwoofer. The disc will play 5.1-channel sound only
if you’ve connected a DTS or Dolby Digital receiver
or decoder and if the disc is encoded in the Dolby
Digital or DTS format.
Please Read This Before Using the DIGITAL
AUDIO OUT Jack!
This player’s digital output jack is designed for a
connection to a Dolby Digital or DTS receiver or
decoder. Older digital equipment may not be
compatible with the Dolby Digital bitstream. Such a
connection can create a high level of noise that may
be harmful to your ears, and could damage head-
phones or speakers.
Basic connections are as follow:
1. Connect the left and right audio cables to your
audio/video receiver and to the AUDIO OUT jacks on
the back of your DVD receiver.
2. If you have a Dolby Digital or DTS receiver, use the
DIGITAL AUDIO OUT jacks to connect the receiver to
the DVD player. You must also set the Digital Output
setting in the Sound menu.
NOTE
Optical cables carry only the audio
portion of the signal. A video connec-
tion must also be established by con-
necting a video cable to the (SAT)
video input.
Speakers
There are 3 speakers
equipped with the
unit (2 front, 1 sub-
woofer). In order to
enjoy good surround
effects, all three
speakers need to be
connected to the unit.
If you want to enjoy
full range of sound
effects, it is a must to
use the subwoofer
with the speakers to
maintain adequate
bass signal.
Antenna and Speaker
Wire Connection
Push Speaker terminal tab
down to insert wire.
Release tab to lock wire in
the terminal.
NOTE: Make sure the insulation
is completely removed from the
ends of the Antenna and
speaker wires at all connection
points.
1. ON / ECO
• To turn the unit on/ off. When the system is turned on,
the unit will go to Standby mode (red led will lit), then
press again to power the unit up in the last mode used.
2. SOURCE
• To select input source. (DVD(CD), AUX 2 and TUNER)
3. BAND / APP
• In Tuner mode, press to select between radio BANDS
or press and hold to enter AUTO PROGRAM mode.
4. PROG. / SET
In TUNER mode:
• Enters program mode for tuner; applies new settings
for clock and timer mode.
5. CLOCK / TIMER /
• Adjusts clock time.
• Enter timers setting mode and turn this mode on/ off.
6. TUNING - / SKIP REVERSE
In DVD / CD / mp3 mode:
• To skip to the beginning/previous track in CD mode
and the beginning/previous chapter (only while play-
ing).
In tuner mode:
• To move back to the beginning/previous preset memo-
ry location (in preset mode).
• Search up radio frequencies (in tuning mode).
7. TUNING + / SKIP FORWARD
In DVD / CD / mp3 mode:
• To skip to the next track in CD mode and the next
chapter (only while playing).
In tuner mode:
• To go to the next preset memory location in tuner
mode. (in preset mode)
• Search up radio frequencies (in tuning mode).
8. STOP / TUNE / PRESET
In DVD / CD / mp3 mode:
• To stop DVD/CD playback.
In tuner mode:
• Toggles between tune and preset mode.
9. PLAY / RDS
• To start DVD/CD playback.
• Shows RDS information.
10. - VOLUME +
• Adjust volume level.
11. OPEN / CLOSE
• Press to open / close the disc door.
12. PHONES
Plug your headphones (not supplied) into it for your
private enjoyment. Speakers will be off when phones
are inserted.
13. STANDBY LED
• Lights when in STANDBY mode.
14. TIMER LED
• Lights when timer is set.
RDS
1 2 6 10 11 4 5 3 8 9 7 12
14
13
CS1200VD EN PART 1 5/20/03 11:12 AM Page 12