TOA Electronics C-RM500 - Manual (Page 12)

5.1.11. Selecting the camera position
Step 1. Enter the camera position number with the
numeric keypad.
Step 2. Press the Position key.
The camera image corresponding to the selected
position will be displayed on the monitor.
Note
When the Trace function is used in the camera setting, the selection of Position No. 255 executes Auto-Trace
operations.
12
LCD screen
A U T O F O C U S
AF AF
Lightis
AF
Auto-focus operation is completed.
LENS SPEED
LOW HIGH
LENS SPEED
LOW HIGH
LENS SPEED
LOW HIGH
LENS SPEED
LOW HIGH
Lights
LCD screen
5 P O S I T I O N
POSITION
5
(Example)
5.1.9. Changing the lens speed
The speed of lens movement when the Zoom or Focus key is pressed can be adjusted in 4 steps of operation:
1) Very slow, 2) Slow, 3) Moderately fast, 4) Fast.
Step 1. Press the Lens Speed key.
The speed indicator number increases by one each time the Speed key is depressed to indicate that
the lens speed has been increased by one level. (Lens operating speed returns to "Very slow" when
the Speed key is pressed while in Fast mode.)
Step 2. Repeat Step 1. until the desired speed is displayed.
5.1.10. Activating the auto-focus function
When a Combination camera is connected, the Auto-Focus function can be activated with a press of the Auto-
Focus key.
Press the Auto-Focus key while the camera is
selected.
The indicator remains lit while the Auto-Focus
function is in operation.