TOA Electronics C-RM500 - Manual (Page 15)

5.2.4. Using the abbreviated numbers
By merely pressing the abbreviated number followed by the SET key, the camera image (camera number and
position number) programmed under the abbreviated number can be displayed on the monitor.
(Refer to p. 38 "Abbreviation.")
Step 1. Enter the abbreviated number with the
numeric keypad.
Step 2. Press the SET key.
The programmed camera position's
image will be displayed on the full
screen. Simultaneously, the Control
indicator lights, permitting camera
operations with the joystick.
15
A B C D E F G H
FUNCTION
LCD screen
D F U N C T I O N K E Y
0 1
CONTROL
Lights
Display of the camera number programmed
into the Function key.
LCD screen
2 5 S E T
0 1
Display of the camera number programmed
under the abbreviated number.
CONTROL
SET
Lights
2 5
5.2.3. Using the Function keys
By simply pressing a Function key (A – H), the camera image (camera number and position number)
programmed into the key can be displayed on the monitor. (Refer to p. 37 "Function key programming.")
Press a Function key (A – H).
The corresponding camera image (camera number and position number) is displayed on the full screen of the
monitor.