Tascam BD-R2000 - Manual (Page 26)

26
Dubbing/Importing
Formatting (Continued)
5 Select “YES”, and press the [OK] button in the
format confirmation screen
• Formatting starts.
• After formatting is complete, a “THE DISC HAS BEEN
FORMATTED” message appears on the monitor, and the
normal screen is displayed.
Memo:
• To return to the initial screen without formatting the disc,
select “DO NOT FORMAT” and press the [OK] button.
Alternatively, you can press the [RETURN] button to return
to the initial screen without formatting.
Note:
• Do not turn off the power or unplug the power cable when
the "FORMATTING DISC…" message is displayed.
• Note that formatting a disc with copyright-protected titles
erases all the titles from the disc.
o
Cancel formatting
Memo:
1 Press the [OPTION] button while formatting
2 Select “STOP” and press the [OK] button
• A confirmation screen to stop formatting appears.
3 Select “YES” on the confirmation screen and
press the [OK] button
• Formatting is stopped.
Note:
• Formatting can be stopped if it seems to take a long time
(more than two minutes).
• If for any reason formatting cannot be stopped, the
confirmation screen for stopping formatting will not appear
even if the [OPTION] button is pressed.
%10(+4/
6*'&+5%9+..$'(14/#66'&+0:::
#..4'%14&'&6+6.'59+..$''4#5'&
+66#-'5#$176;;;/+076'5
&1;179#0661(14/#6!
;'5 01
%10(+4/
6*'&+5%*#5$''0(14/#66'&
1-

126+105
$#%-
5612
(14/#6
;17%#0':+6(41/6*'126+105%4''0

%10(+4/
(14/#66+0)9+..$'56122'&
5612!
;'5 01
(14/#6
;17%#0':+6(41/6*'126+105%4''0