Technicolor - Thomson DTH190 - Manual (Page 10)

10
M
enus…
The functions of your DVD player are not all accessible directly through the remote control or
front panel keys. A certain number of functions are accessible through menus that you can
display or remove as you wish. These menus are used as follows:
1. Display the menu by pressing the MENU key (disc loaded = Disc Menu) or
STOP key (= Player Menu).
2. Select a menu or function by pressing the Navigation keys.
3. Validate your selection by pressing OK .
4. Change Settings, by pressing the Navigation keys.
5. To exit a menu on a disk, press PLAY . To return to the previous menu press
MENU or TITLE (depends on the disk menu).
6. To exit a drive menu, press PLAY or return to the previous menu using the
Navigation keys or the STOP button (depends on the disk menu).
Selecting menu functions and options using the remote control
Navigation keys
Player menu (1)
Disc Menu (2)
Automatic playback:
ON (
k page 16).
or
The player menu enables you to
configure the player (languages of the
menus and disc, audio outputs,
display modes), to choose the Play
mode and lock the player.
The appearance and contents of the
menus vary according to the DVDs
(follow on-screen instructions).
1.
2.
or
TITLE ALL CHP/TR K A-B
Automatic playback:
OFF (
k page 16).
DTH190_EN 9/07/02 17:43 Page 10