Technicolor - Thomson DTH190 - Manual (Page 18)

18
R
epeat playback
Repeat playback of a scene between two points
1. Select the repeat play function and choose A-B with the Navigation keys.
2. Press OK to memorise the beginning of the scene you want to repeat.
3. Wait a few seconds before pressing again on OK to mark the end of the sequence to be repeated
(point B). A-B Repeat appears to tell you that the repeat playback of the sequence is starting.
To stop repeating the sequence, select
Off
with the Navigation keys or press STOP .
• Repeat functions remain active until you turn them off, open the disc tray or turn off the power.
• Repeat play only works with discs that show the elapsed time on the display.
• This may not work correctly with certain discs (Video CDs in PBC mode).
• If during a fast forward or backward reading the B point is reached, the player will proceed at normal speed
from the A point
• If during a fast search the A point is reached, the player will start reading at normal speed from the A point.
• The A-B repeat mode will be cancelled if you press STOP , if the disc is ejected or if another repeat mode is
selected.
Repeat play
Select the Repeat icon by pressing the button on the remote control. You can access the
repeat sequence function by displaying the banner using the yellow INFO button and
selecting the Repeat icon using the Navigation buttons. With the Navigation keys, select
one of the following functions:
Disc Repeat, Title Repeat, Chapter Repeat, A-B Press
OK to set point A, A-B Press OK to set point B
.
To repeat the playback of a title, chapter, track, scene, selected A-B segment (except on Video
CDs) or entire disc.
Navigation
keys
DTH190_EN 9/07/02 17:43 Page 18