Technicolor - Thomson DTH190 - Manual (Page 24)

24
A
ppendix
Before requesting service (troubleshooting).
No power?
• Correctly connect the AC Power Cord to an AC
Outlet.
There is no picture?
• Turn on the TV set and your DVD player.
• Check connections.
• Make the correct input selection on the TV set.
The remote control does not work?
• The batteries are fully discharged and must be
replaced. When you insert the replacement
batteries, ensure you align their positive and
negative polarities correctly (
k page 4).
• Remove batteries and hold down one or more keys
for several minutes to drain the microprocessor
inside the remote to reset it. Reinstall batteries and
try remote again.
• Point the remote control to the front of the player.
• Operate the remote control within an 8 m range
from the player.
• Remove any obstacles between the remote control
and the red LED on the player.
There is no sound or it can hardly be heard?
• Make the correct audio input selection and volume
adjustment on the TV set or hifi system (amplifier
or AV selector).
There are no subtitles?
• Check that the subtitle is recorded on the disc.
• Subtitles disappear from the TV screen. See how to
display subtitles.
The menu language is not the one you want?
• The menu language for your player has not been set
during set-up.
• Your preferred menu language on a DVD disc
(if available) has not been set during set up.
• The menu is not available in your language on the
DVD disc.
Audio (spoken) and / or subtitle language is not the
one selected during the initial player set-up?
• If the audio or subtitle language is not available on
the DVD disc, the language selected during initial
player set-up will not be heard or seen. The disc’s
priority language (default language) is selected
automatically. If you want another language, press
AUDIO “ ” key and SUBTITLE “ ” key to select it
temporarily for this disc (Or press MENU during
playback, if the disc has its own language selection
menu).
If you forget your code key number for the parental
rating (locking) function, you must do the following:
• Open the player’s disc tray and, if it contains a disc,
remove the disc. Close the disc tray. The player now
displays its menu on the TV screen.
Hold the STOP button down and press CLEAR . The
drive is now unlocked, all the other parameters
remain unchanged.
Troubleshooting guide
Power requirements: AC 230 V, 50 Hz Power consumption: 15W Operating temperature range:
+ 5 to + 35° C Operating humidity range: 10 to 75% (no condensation)
Audio signal to noise ratio (DVD): 100dB (A wtd)* Wow and flutter: below measurable limits*
Total harmonic distortion:
less than 0.004%* Pickup: Wave length: 655 / 780 nm,
Laser power CLASS 1 - 2 Laser diodes
* Nominal Specification.
• THOMSON Multimedia reserves the right to change the specifications without notice.
Technical data
Conception : M.Rensonnet - Réalisation : INTERCONCEPT DVD - SHINCO / DTH 190 E / EN - BK / RST - IC / 06-2002
DTH190_EN 9/07/02 17:43 Page 24