Toshiba rd-xs30b ope, Initializing a dvd-ram disc (logical format) – Toshiba RD-XS30B User Manual

Page 22

Advertising
background image

22

TOSHIBA RD-XS30B Ope

Before operating this recorder (Continued)

Introduction

Be sure to read this section prior to using a DVD-RAM disc on this recorder for the first time.
For DVD-R, initializing is not necessary.

Initializing a DVD-RAM disc (Logical Format)

A disc should be initialized in the following cases: (The
recorder may display a message to request you to do
so.)

e.g.

When you use a new DVD-RAM disc on this recorder
for the first time.
If data fragments produced by repeated recording or
erasing have accumulated.
If a disc error has occurred.
When you want to record on a DVD-RAM disc for PC.
(

page 7)

Initializing formats a disc logically and insures that it will
perform to its full capability. However, this erases all data
on the disc, so make sure that it does not matter if data
on the disc is erased whenever you initialize a disc.

How to initialize a disc
To initialize a DVD-RAM disc, load it in the recorder. See

page 18 for loading a disc.

1) During stop, press the QUICK MENU button.

The following menu appears. (The actual contents
depend on the operational status of the recorder.)

e.g.

2) Press the / buttons to select “Disc format”,

then press the ENTER button.
A sub menu appears on the right side.

e.g.

3) Press the ENTER button.

e.g.

Numbering a disc
The recorder automatically numbers discs when
initializing. However, you can assign a desired number
(using 3 digits) and designate sides A and B on a double-
sided disc.
(1) Press the / buttons to select “Edit” of “Disc

Number” then press the ENTER button.

(2) Press the / buttons to select a digit.
(3) Press the / buttons to shift to the next place.
(4) Repeat steps (2) and (3).
(5) Press the ENTER button.

Naming a disc
You can name a disc.
(1) Press the / buttons to select “Edit” of “Disc

Name”, then press the ENTER button.
The character input window appears.

(2) Enter a disc name following the procedure of

“Entering characters” (

page 24).

(3) Press the

button to eliminate the window.

DVD-R Broadcast Record

AV Record Quality

Exit

Quick Menu

Bit rate

Special Playback Mode

Disc Information

Disc format

AV Record Quality

DVD-R Broadcast Record

DVD-R Broadcast Record

AV Record Quality

DVD-RAM Format

Quick Menu

Bit rate

Special Playback Mode

Disc Information

Disc format

AV Record Quality

DVD-R Broadcast Record

%

0

DV D - R A M Format

0 0 1 –

Set

Select

Disc Number

Disc Name

Unformat

Start

Cancel

Edit

Edit

Disc format

RD-XS30B.Ope(US)p018-026

2/15/03, 2:56 AM

22

Advertising