Toshiba RD-XS30B - Manual (Page 40)

40
TOSHIBA RD-XS30B Ope
Using elapsed programming data (Make an
entry of the same TV programme)
1) Press the REC MENU button.
The REC MENU appears.
2) Press the QUICK MENU button.
The Quick Menu appears.
3) Press the / buttons to select “Elapsed
Programing”, then press the ENTER button.
The list of the past entry records appears.
The latest 9 entries are listed.
You can access following and previous pages by
pressing the PICTURE SEARCH (
/ ) button.
4) Press the / buttons to select an entry you
want to use, then press the ENTER button.
Information corresponding to the selected
programme appears on the Timer Programing list.
5) Press the / buttons to select an item, then
press the ADJUST button to modify the item.
6) When complete, press the ENTER button.
7) Press the REC MENU button to exit.
Note
• The recorder stores the latest 36 entries. A new entry
erases the oldest one when the number of entries is over
36.
Remaining volume
1) Press the REC MENU button.
The REC MENU appears.
2) Press the QUICK MENU button.
The Quick Menu appears.
3) Press the / button to select “Disc Budget
Calculation” then press the ENTER button.
The Disc Budget Calculation menu appears.
4) Press the / buttons to select an entry, then
press the ENTER button or press the ADJUST
button.
The recorder calculates on a bar graph how much
a specific programme (identified by a check mark)
will occupy on the disc.
Pressing the ADJUST button can display or remove
the check mark.
e.g.
5) Correct the parameters of the entry if
necessary.
(Skip to step 7 if you do not need this.)
You can change “Media”, “Mode”, “Rate”, and
“Audio”.
Select an item you want to modify and press the
ENTER button. The item will be ready to be altered.
Press the ADJUST button to modify. When
complete, press the ENTER button.
6) Press the button.
Programme modification is registered.
7) Press the REC MENU button to exit the GUI.
Notes
• When a Reservation disc is inserted in the recorder
( page 75), you cannot check the remaining volume of
other discs.
• You can calculate up to eight programmes at a time for
remaining volume, starting from one closer to the start time
of the programme entry.
Selected entry Available disc volume
When the entry item is marked X, the
recording does not end. Change the setting.
Programming a recording (REC MENU) (Continued)
Basic operations
Rate
DVD HDD Elapsed Available Selected(current)
CH Date
Select Return Adjust Revise List
REC-MENU REC-MENU REC-MENU
Start End Media Audio
( )
REC
MENU Disc Budget Calculation
End
Result Mode
HDD
M N
M N 11:50 6. 0 11:30 D2 6/18(Wed)
6/19(Thu)
6/19(Thu)
6/20(Fri)
DVD 22:00 6. 0 21:30 D2
DVD 23:30 4. 4 20:30 D2
HDD 23:30 2. 2 22:30 D1
3
10
42
4
–
–
–
–
S P
L P
DVD HDD
19:25 06/17(Tu)
RD-XS30B.Ope(US)p036-048 2/15/03, 2:57 AM 40