Default configuration – Technicolor - Thomson 570 User Manual
Page 14
3EC 17766 BAAA TCZZA Ed. 01
1 SpeedTouch™570 Installation
14
Default configuration
When the SpeedTouch™570 leaves the factory and after every Push-to-Defaults, the
SpeedTouch™570 wireless configuration returns to its initial default settings.
These settings are as follows:
•
The default SSID is printed on the identification label located on the bottom of
your SpeedTouch™570:
This unique SSID consists of the word “SpeedTouch” followed by the 6 last char-
acters of the SpeedTouch™570 WLAN access point MAC address, without any
spaces.
•
By default SpeedTouch™570 automatically selects the best DSSS radio channel
number at each start-up.
•
The 'Registration' button is activated by default.
•
Access Control List is empty and locked by default.
•
WEP encryption is disabled by default.