Tripp Lite 1000 VA - Manual (Page 5)

SMART1000RM1U
SNMP CONFIG.
1 2 EPO NORM DELAY
SEE MANUAL
1155 NYCE
ACC, SLOT
5
Connection optional
Your UPS will function properly without these connections.
Serial Port Connection
Using the serial cable provided, connect a serial port
from a computer to a serial port on your UPS. Install
on the computer the Tripp Lite power protection software
appropriate to its operating system.
USB Port Connection
Using the USB cable provided, connect a USB port
from a computer to a USB port on your UPS. Install
on the computer the Tripp Lite power protection software
appropriate to its operating system.
EPO Port Connection
Using the RJ-11 cable provided, connect the
Emergency Power Off (EPO) port of your computer to
a user-supplied normally closed or normally open
switch according to the circuit diagram at the right.
The EPO port is not a phone line surge suppressor; do
not connect a phone line to this port.
1
SMART1000RM1U
SNMP CONFIG
1 EPO
NORM DELAY
SEE MANUAL ACC, SLOT
SMART1000RM1U
SNMP CONFIG.
1 2 EPO
NORM DELAY
SEE MANUAL
1155 NYCE
ACC, SLOT
2
3
1
2
3
OPTION 1: USER SUPPLIED NORMALLY CLOSED SWITCH
OPTION 2: USER SUPPLIED NORMALLY OPEN SWITCH
RJ11
PLUG
2
3
4
5
NO CONNECTION
2-3 JUPMER
N.C. EPO SWITCH
RJ11
PLUG
2
3
4
5
NO CONNECTION
N.O. EPO SWITCH
EPO Circuit Diagrams
200210187 Smart 700-1000 RM1U Owner’s Manual 93-2102.qxd 11/1/2002 9:50 AM Page 5