Tektronix Phaser 340 - Manual (Page 118)

4 Caring for Your Printer
4-20 Phaser 340 Color Printer
6. If one or more of the color bars are still missing, repeat the
cleaning sequence by pressing the
Clean button once again.
When cleaning ends, the printer outputs a cleaning page that you
may discard as normal office waste.
If the second cleaning sequence does not cure the light stripes or
missing colors problem, you can press the
Clean button for a
third time to repeat the cleaning sequence.
7. If your prints still have color stripe problems after the third
cleaning sequence, service may be required. Refer to “Printer
service” on page 6-1 for more information.
8. Return the printer to normal operation by pressing the button.
Exit Exit