Tektronix Phaser 340 - Manual (Page 195)

B Expanding Your Printing System
B-10 Phaser 340 Color Printer
Each disk must have a unique SCSI ID number. Do not turn on the printer or
disk until each disk has a unique number.
Note See “Interface cables and adapters” on page 5-3 for cable ordering
information.
Multiple disks The printer can support up to seven external disks. When
you have more than one disk connected to the printer, follow these
guidelines.
■ Each disk must have a unique SCSI ID number. Do not turn on the
printer or disk until each disk has a unique number.
■ The printer must always be at one end of the chain with a
terminator at the other end.
■ Only one disk can contain a Sys/Start file.
Parallel Service Only
Second
Feeder
PHASER 340
SCSI Disk
Ethernet® 1 Service 2 Reset
SCSI
9101-43
1 2 3