Tektronix Phaser 340 - Manual (Page 79)

Printing 3
User Manual 3-11
Selecting TekColor corrections from the front panel
Use the following steps to change the TekColor correction mode through the
printer’s front panel menu.
1. When the printer is on and the Ready message appears, press the
Menu button. The printer displays the first selection in the menu:
Help Pages
<---- ----> Menu
2. Using the left ( <---- ) or right (---->) arrow buttons, scroll
through the selections until the following message appears:
TekColor Correction
<---- ----> Menu
3. Press the Menu button to access color correction selections. The
printer displays the following message:
TekColor Correction:Vivid Color*
<---- ----> OK
4. Using the right or left arrow buttons, scroll through the color
correction selections. An asterisk next to the selection indicates
the currently active setting.
5. Press the OK button to confirm your selection.
6. Return to the top level of the menu by pressing the button
until the printer displays the Ready message.
Exit Exit