Toshiba VF-nC1 User Manual
Page 46
E6581090
D-5
4
4.1.3 How to set extended parameters
The VF-nC1 has extended parameters to allow you to make full use of its functions. All extended
parameters are expressed with H and three digits.
Basic parameter
H－－－
H～H
H～H
H～H
H～H
H～H
H～H
H～H
H～H
ENT
Press the MON key once and use the ً
key and the ٕ key to select “H－－－“ from
the basic parameters.
Press the ً key and the ٕ key to
select the parameter to be
changed. Then, press the ENTER
key to display the set parameter.
MON
[Steps in key entry for extended parameters]
: Switches to the setting monitor mode. (displays CWJ)
: Selects "H－－－" from basic parameters.
: Displays the first extended parameter.
: Selects the extended parameter to be changed.
: Reads the programmed parameter setting.
MON
ENT
ً
ٕ
ENT
ً
ٕ
ً
ٕ
ENT
: Changes the parameter setting.
: Saves the changed value of the extended parameter setting.
Pressing the
MON
key instead of the
ENT
key moves back to the previous status.
★
See 11.3 for the table of extended
parameters.