Hdd-j35, Connecting to vcr (for archiving), Connecting to amplifier – Toshiba HDD-J35 User Manual
Page 24
24
4
CONNECTING TO VCR (FOR ARCHIVING)
A VCR can also be connected to this recorder through the Composite Video and Stereo Audio output connectors
located at the back of the HDD-J35 recorder for archiving programs from the HDD. Use a composite Audio/Video
cable to connect from the HDD-J35 Video/L/R output connectors to the VCR’s Video/L/R input.
Audio/Video cable
(supplied)
VCR
To Audio inputs
To Composite Video
inputs
HDD-J35
white
red
Match the
colors when
connecting
white
red
SD VIDEO OUT
RGB
L
R
L
R
(COAXIAL)
(OPTICAL)
DIGITAL
AUDIO OUT
Y/G
P
B
/B
P
R
/R
H
V
VIDEO
HDMI
HD VIDEO OUT
ANALOG
AUDIO OUT
Audio/Video cable
(supplied)
5
CONNECTING TO AMPLIFIER
If you connect this recorder to an audio amplifier equipped with a Dolby® Digital decoder, use an optical or
coaxial digital cable (not supplied) to connect from the recorder’s “DIGITAL AUDIO OUT (Optical/Coaxial)” to
the digital audio input of your amplifier.
In this case make sure that you do not need to connect the audio
connectors (red and white) on the Audio/Video cable to your TV.
Amplifier equipped with
a Dolby decoder
HDD-J35
TO DIGITAL AUDIO
(OPTICAL or COAXIAL)
Optical or Coaxial digital cable (not supplied)
: Front speaker
: Rear speaker
Subwoofer
: Centre speaker
: Signal flow