Taiwan Electrical & Electronic Manufacturers N930R - Manual (Page 46)

2.5 Installing the Notebook Device Drivers
If you already have an operating system installed into your notebook computer, it is best to
install the needed device drivers for using the built-in devices of your computer. Before insta-
lling the drivers, check with your dealer first if they have already installed all the drivers
along with the operating system. If not, follow the procedures below:
INSTALLING WINDOWS XP FROM OPTICAL DISK DRIVE
To install Windows XP directly from your optical disk drive, please go to Boot menu of
BIOS setup menu. Use arrow key to select "CD-ROM Drive", then use "+" or "-" to move it
to the top. Go to Exit menu and select "Exit Saving Changes". Accordingly, insert the
Windows XP installation CD into optical disk drive with following the instructions on the
screen to finish the installation.
DRIVER INSTALLATION NOTE:
• Please be notified that whenever you install the driver utility, it should be install the
CHIPSET Driver first.
INSTALLING THE CHIPSET DRIVER
Your notebook computer uses the advanced chipset. Installing the driver to enhance the stabi-
lity and performance.
Installing Chipset device driver for Windows XP
1. Click the Start button, then point to Run. The Run dialog box appears.
2. Click the Browse button and specify the directory as.
"E:\Drivers\WinXP\Chipset\Setup.exe".
3. Click "OK" to execute the setup program. The Setup box appears.
4. Click “Next” continuously to install this driver when screen displays this command.
5. Click “Yes” to accept the License Agreement.
6. Click “Next” to continue the following step.
7. Tick the option "Yes, I want to restart my computer now.",
and press Finish to restart your system.
INSTALLING THE VGA DEVICE DRIVER
Following is the procedure for installing the Video Accelerator 3D Adapter VGA driver to
your computer:
Installing VGA device driver for Windows XP
1. Click the Start button, then point to Run. The Run dialog box appears.
2. Click the Browse button and specify the directory as.
"E:\Drivers\WinXP\VGA\Setup.exe".
3. Click "OK" to execute the setup program. The Setup box appears.
4. Click Next to install this driver when screen displays this command.
Eng
lish
MANUAL INGLES OK 20/7/06 11:40 Página 45