Taiwan Electrical & Electronic Manufacturers N930R - Manual (Page 85)

6.4 Security Menu Setup
• Supervisor Password Is
Set/Clear selections show that the notebook is under controlled by Supervisor Password or
not.
• User Password Is
Set/Clear selections show that the notebook is under controlled by User Password or not.
• Set Supervisor Password
Supervisor password gives you the authority in accessing the setup utility. You also need to
enter this password in system booting and resuming from suspend mode. When you press
<Enter> in this field, the Set Supervisor Password dialog box appears. Enter a new pass-
word with up to 8 alpha-numeric characters, and then re-enter it for confirmation.
• Set User Password
This field is only available when Supervisor Password has set. Enter the user password when
boot the system or resume from suspend mode. But if the Write Protect is set in the Fixed
disk boot sector field, you should enter a supervisor password to access the fixed disk when
boot the system or resume from suspend mode.
• Fixed Disk Boot Sector
If you set this field to Write Protect, the write protect boot sector on hard disk will protect
against viruses. In this situation, only the supervisor can access the Boot Sector of fixed disk.
• Password on Boot
If you set this field to Enabled, your computer will always ask for the password every time
you boot your computer.
Eng
lish
MANUAL INGLES OK 20/7/06 11:40 Página 84