Toshiba TEC TRST-56 SERIES - Manual (Page 11)

3. APPEARANCE EO1-13016
3.1 Front/Rear View
3- 1
3. APPEARANCE
3.1 Front/Rear View
3.2 Operation Panel
POWER LED (Green)
Lights when the power is turned on.
ERROR LED (Red)
The Error LED indicates an error by lighting or blinking.
ON:
Lights when an error is detected.
OFF: No error is detected. (Normal state)
FEED Button
Used to feed the receipt paper. A touch of this button causes one line feed.
Pressing and holding it feeds the paper continuously. When the power switch is
turned on while the [FEED] button is pressed and held, the printer will perform a
self test print.
Error Status Table
Error POWER LED ERROR LED Solution
The printer cover is
open. ON
ON
When the printer cover is opened, the printer
stops printing. Closing the cover resumes
printing.
Paper near end
ON ON
This error indicates that the paper is nearly
finished, but the printer keeps printing. Load a
new paper roll soon.
Paper end
ON ON
When the paper has been used up, the printer
stops printing. Loading a new paper roll
resumes printing.
The print head is
overheated.
ON Blinks slowly
When the print head is overheated, the printer
stops printing. Allow the printer to cool. When
the temperature becomes normal, the printer
resumes printing automatically.
Cutter motor is locked
by jammed paper.
ON
Blinks slowly
+
Blinks quickly
When the cutter motor is locked, the printer stops
the operation. Removing the jammed paper
resumes the operation.
NOTE: If other LED status except for the above occurs, turn the power off, and then on. If this does
not restore the LEDs, contact your nearest TOSHIBA TEC representative for assistance.
Rear View
Power Switch
AC Adapter Box
POWER
ERROR
FEED
Front View
Operation Panel
Top Cover
AC Adapter Box
Printer Cover
Ejector