Routing module, Session module, Sntp module – Technicolor - Thomson ST585 V6 User Manual
Page 806: System logging messages, Routing module session module sntp module

E-DOC-CTC-20061027-0004 v1.0
System Logging Messages
782
Routing Module
Session Module
SNTP Module
LOCAL1
INFO
RIP IP Address <ip-address> not found in RIP table
Facility
Severity
Contents
LOCAL1
INFO
GRP Default destination is routed via gateway <ip_address>
LOCAL1
INFO
GRP Default destination is not routed anymore via gateway <ip_address>
SECURITY
INFO
LABEL Rule Id:<rule_id> Protocol: ICMP Src_ip: <ip_address> Dst_ip:
<ip_address> ICMP message type: <message_type_name || message_type_id >
Label: <label_name>
SECURITY
INFO
LABEL Rule Id:<rule_id> Protocol: <protocol_name> Src_ip: <ip_address>
Dst_ip: <ip_address> Label: <label_name>
Facility
Severity
Contents
AUTH
NOTICE
SESSION TIMEOUT Timeout! (after <seconds> sec)
Facility
Severity
Contents
NTP
WARNING
SNTP Unable to contact server: <SNTP server ip>
NTP
WARNING
SNTP Server not synchronized: <SNTP server ip>
NTP
WARNING
SNTP Invalid response from server: <SNTP server ip>
NTP
INFO
SNTP Synchronized to server: <SNTP server ip>
NTP
INFO
SNTP Synchronized again to server: <SNTP server ip>
NTP
WARNING
SNTP Roundtrip exceeds limits
NTP
ERROR
SNTP No server(s) configured, check configuration
NTP
ERROR
SNTP Systemtime update: time setting <systemtime> > new time setting:
<new time>
Facility
Severity
Contents