Teac E24E - Manual (Page 20)

10 TEAC PortaCD-RW Drive User’s Manual
Figure 4. Connecting Cables (USB version)
4. Connect the smaller plug on the USB interface cable to a USB port on
the computer.
5. Insert the male plug of the AC power cable into an AC power outlet.
This step turns on the power to the PortaCD-RW drive and concludes this
procedure. Please see “Installing the Driver Software” on page 11.
Note: If you are connecting the cable to a USB hub, use a USB hub that
features an AC Power adapter.
USB cable
headphone cable
(not included)
AC adapter cable
Connection Sequence
1. power cable --> drive
2. USB cable --> drive
3. USB cable--> computer
4. power cable-->AC outlet
PortaCDRW.book Page 10 Wednesday, April 4, 2001 10:49 PM