Wiring, Warning – TOYOTA EPS9000 User Manual
Page 16
PREP
ARAT
IO
N
PREP
ARAT
IO
N
16
WIRING
1.
Make sure that the power switch (2) of the power supply box (1) is OFF.
2.
Insert the plug (4) of the DC power cord (3) securely into the power supply connector (5) of the embroidery
machine.
3.
Insert the other plug (6) of the DC power cord (3) securely into the DC power supply connector (7) of the power
supply box (1).
4.
Insert the plug (9) of the AC power cord (8) securely into the AC power supply connector (10) of the power supply
box.
5.
Insert the plug (11) at the other end of the AC power cord (8) securely into the single-phase 100 to 240 V power
supply.
WARNING
Connect the earth wire of the AC power cord to the earth terminal
It could cause electric shock unless the machine is grounded properly.
The mains plug must be accessible after it is connected to the supply socket, so that it can easily
be disconnected in an emergency.
Types of AC Power Cord
Plug
Spec.
USA and Canada
EU
Voltage Rating
125 V
250 V
!
AC power source
AC power cord (8)
DC power cord (3)
(to the receptacle with earth terminal)
Embroidery machine
Power supply box (1)
(9)
(11)
(4)
(6)
(5)
(7)
(10) Power switch (2)
(Switch: OFF position)