Toshiba SG-1981 - Manual (Page 50)

QUICK
REFERENCE
GUIDE
Read the Owner’s Manual for details.
CALLER ID CORDLESS TELEPHONE
DIGITAL ANSWERING SYSTEM
SG-1981
UCZZ69739BZ RC009821 Printed in China
SETTING UP THE BASE UNIT
CHARGING THE BATTERY PACK
Red Black
CHARGE
LED
Charging contacts
SETTING / USING THE PHONE
1
Remove the battery cover by sliding it down.
2
Plug the battery pack cord into its socket, observing
the correct polarity.
3
Place the battery pack . Then close the battery
compartment cover.
4
Place the handset on the base unit. You can place
the handset with the dialpad facing up or down.
IMPORTANT
Charge the battery pack for at least 12 to 16 hours.
CALLER ID SERVICE
Raise the antenna to vertical
position.
Telephone Line Cord
AC Adaptor
Single-Line
Telephone Jack
(RJ11C)
Power Outlet
(AC 120V, 60Hz)
NOTE: Plug the AC adaptor firmly
into the base unit and the AC
120V outlet.
ANSWERING MACHINE
For more detailed instructions and examples, please refer to the owner’s manual.
Turning the Answering Machine ON/OFF
Press ANSWER to turn the answering machine on or off.
Every time you press ANSWER , the LED display turns on or off.
Setting the Clock
1
Press and hold TIME till a beep sounds.
2
Select the day of the week by pressing REPEAT or SKIP .
When the correct day is announced, press TIME .
3
Select the hour by pressing REPEAT or SKIP .
When the correct hour is announced, press TIME .
4
Select the minute by pressing REPEAT or SKIP .
When the correct minute is announced, press TIME .
5
Select AM/PM by pressing REPEAT or SKIP .
When AM or PM is announced, press TIME .
Recording and Setting the Greeting Message
To record the greeting message:
1
Press and hold GREETING till a beep sounds.
2
Record your message over the microphone.
3
Press GREETING or PLAY/STOP to finish recording.
To change the greeting message:
1
Press GREETING in the standby mode.
2
During playback, press GREETING again to switch the greeting message.
3
Press PLAY/STOP to exit the system.
Setting the Security code (PIN)
1
Press and hold PIN till a beep sounds in the standby mode.
2
Press REPEAT or SKIP to select the left digit of the PIN.
When your desired number appears on the LED display, press PIN .
3
Press REPEAT or SKIP to select the right digit of the PIN.
When your desired number appears on the LED display, press PIN .
Playing Recorded Messages
1
Press FUNCTION , then press 3 .
2
Press SELECT/CHANNEL and enter your 3-digit area
code.
3
Press SELECT/CHANNEL , then press FUNCTION .
1
Dial the phone number.
2
Press TALK .
3
Press TALK to hang up.
Press TALK and speak.
NOTE: To indicate Caller ID data, let the
phone ring twice before you answer the call.
Set the TONE/PULSE switch to TONE.
Place a call.
If the call does not connect with the TONE setting, set the
TONE/PULSE switch to PULSE
Setting The Tone/Pulse Switch
Area Code
Answering a Call
Making a Call
TONE/PULSE switch
With the handset
With the base speaker phone
1
Press SPEAKER and speak.
2
Press SPEAKER to hang up.
1
Press CID , then press or to display the number you want to dial.
2
Press TALK , then the displayed number will be dialed.
Deleting Caller ID Data
Storing Caller ID Data to Speed-Dial Memory
1
Press CID , then press or to display the number you want to store into
Speed-dial memory.
2
Press MEM , then press , or enter a memory location number.
3
Press SELECT/CHANNEL . A confirmation beep sounds and the Caller ID data is
stored.
Press CID to return to standby mode.
1
Press CID , then press or to display the Caller ID number you want to
delete from the memory.
2
Press DELETE , then press or to select Yes or No.
3
Press SELECT/CHANNEL or DELETE .
4
Press CID to return to standby mode.
Note: For long distance calls, you need a prefix “1” and the area code.
Press
L.D./1 and LOCAL/3 to add or cancel “1” and the area code
before you press TALK .
Setting Up Caller ID
Making a Call with Caller ID Data
To use Caller ID/Caller ID on Call Waiting
features, you must subscribe to both Caller
ID/Caller ID on Call Waiting services provided
by your local telephone company.
Press PLAY/STOP .
Press REPEAT (within 2 seconds after the
beginning of message).
Press REPEAT (after 2 seconds after the
beginning of message).
Press SKIP .
Press and hold REPEAT until your desired
message number appears on the display during
playback of the message.
Press DELETE during playback of the message
you want to delete.
Press and hold SKIP until your desired message
number appears on the display during playback of
the message.
Press PLAY/STOP
Finish the playback of all messages. Then, press
and hold
DELETE till a beep sounds.
Press VOLUME/+ or VOLUME/– repeatedly
To playback the message
To repeat the previous message
To repeat the current message
To skip the message.
To go backward and repeat a
message you choose
To delete a message
To go forward
To stop playback
To delete all messages
To adjust the speaker volume (1-10) MIC
DIGIT AL C ALLE R ID / AN SWE RING SYS TEM
COR DRE SS T ELEP HON E SB-1981
CID
SPEAKER
PIN TIME
GREETING
DELETE
SPEAKER
VOLUME
MEMO
2 WAY REC
PAGE
S K IP
REPEA
T
ANSWER
PLAY
STOP
VOLUME/+
DELETE
VOLUME/–
REPEAT
GREETING
PIN
ANSWER
LED Display
PLAY/STOP
SKIP
TIME
SPEAKER
MEMO/2WAY REC
MIC
DIGIT AL CALLER ID / ANSW
ERING SYSTEM CORDRESS TELEPHONE
SB-1 981
CID
DELETE FUNCTION SELECT RDL/P
TONE
LOCAL L.D.
CID
FUNCTION
1
TALK
MEM
CID
FLASH
3
DELETE
SELECT/CHANNEL
,
DELETE FUNCTION SELECT RDL/P
TONE
LOCAL L.D.
CID
FUNCTION
TALK
FLASH
3
TONE/
SELECT/CHANNEL
Fasten the AC
adaptor cord.