10 troubleshooting, Ultimate pvr with hd digital jukebox – DVico TVIX PVR R-2230 User Manual

Page 63

Advertising
background image

Ultimate PVR with HD Digital Jukebox

63

10 Troubleshooting


** For detailed instructions, please refer to the the latest pdf file on the TViX Homepage
(

www.tvix.co.kr

) or TViX FAQ.



Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do
not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below
before taking the system for repair.


No Screen Display. Video
Output not working.

1. Press the TVOUT button on TViX remote to toggle between TV OUT
settings.
2. Check the TV-OUT settings and cable-type on the TViX and ensure
that it is consistent with the VIDEO-IN settings of the TV.
3. Ensure that the Video Cable is securely connected to the TViX and to
the TV.

The TViX does not respond to
the Remote Control. Menu
Items cannot be selected.

1. Reduce the distance between the Remote and the TViX and try again.
2. Replace remote batteries.
3. Perform a Hardware factory Reset Procedure.
4. Check for interference from other IR sources by trying to operate the
TViX with all other components turned off.

TViX does not recognize the
HDD.

1. Check the USB connection to the Hard Disk Drive(HDD).
2. Check to ensure that the HDD has been correctly partitioned and
formatted.

TViX does not show subtitle.

Re-name the subtitle file the same as avi file name (except for file type
extensions).
TViX can show the subtitle when the file name is same.

TViX does not display external
video

Configure the external device’s A/V output to NTSC(480i)/PAL(576i) and
analog sound.

TViX does not display the
Network-shared Folder on your
PC.

1. Check network connection between your PC and the TViX.
2. Reboot the TViX and re-establish the connection.
3. Depending on network environment, there may be a delay in
searching for the network for up to about 10 minutes.
4. Ensure that WEP and ESSID settings are accurate.

Unable to Play Xvid, or MPEG,
or AVI video files etc.

1. Ensure that the selected video file contains supported video codec.
2. Run the check Disk on the SETUP.
3. If playing a file from a network drive, there may be too much traffic on
the network (check for virus). Try to reboot your PC and establish
connection again.

Time-shifting is not working in
digital channel.

The first partition of the internal hard disk must use the NTFS format.
FAT32 format can cause an error message.

Advertising