Clock setting, Auto clock setting, Auto clock adjustment to set auto clock to off – Toshiba MW30G71 User Manual

Page 21

Advertising
background image

21

Basic setup

• Depending on the reception

condition, it may take approx. thirty
minutes.

• The POWER indicator will light.

Clock setting

The auto clock function will automatically set the built-in clock (Month, Day,
Year and Time) when the unit is connected to an antenna or cable system
and it is turned off. As the unit searches for a receivable station in your area
and it receives a broadcast signal for auto clock, the auto clock needs
several minutes to set itself.

Preparation:

• Connect the antenna or cable TV system.
• If you use a cable box, turn it on.
• Plug the AC power cord to the AC outlet.

Auto clock setting

Make sure the unit is turned off.

• If you press POWER, the Auto Clock
set is not effective.

1

Wait at least three minutes and press POWER.

2

Press TV/VCR to select TV/VCR mode. Then
press DISPLAY to check the clock on the
screen.

3

If the clock is not set, check the antenna
condition. The Auto clock may not function
properly if the reception condition is not
good.

4

Auto clock adjustment

To set auto clock to OFF

The Auto clock adjustment will be performed at
12:00 PM everyday if you turn off the unit.

• If you use a cable box and you want Auto clock adjust-

ment to be performed, the cable box must be left on.

• The Auto clock adjustment is not effective when there is a

difference of more than 5 minutes exists between the
built-in clock time and the actual time.

When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want auto clock set (Adjustment):

Press MENU in the TV/VCR mode, then press
or

to select TV SETUP

menu.

1

Press

or

to select “AUTO CLOCK”.

2

Press

or

to select “OFF”.

3

Press RETURN to make the menu screen
disappear.

• When the AUTO CLOCK is set to

“OFF”, the Auto Clock adjustment
does not function.

• Set the clock manually

23

.

4

Notes:
If the unit does not operate properly, or No key operation

(by the unit and/or the remote control): Static electricity,
etc., may affect the player's operation. Disconnect the AC power
cord once, then connect it again.

• The TV section has its own menu and also DVD section has

its own menu

$'

.

• If no buttons are pressed for more than 15 seconds, the TV/VCR

menu screen will return to normal TV operation automatically.

POWER

MENU

00:00:27 SP

TV/VCR

8:47AM SAT

002

ANT

CABLE

T V S E T U P

L A N G U A G E

E N G L I S H

C L O C K S E T
A U TO C L O C K

O N /

O F F

S TA N D A R D T I M E
D AY L I G H T

S AV I N G T I M E

A U TO

: S E L E C T

: A D J U S T
R E T U R N : E N D

TV/VCR

C/D/B/A

DISPLAY

Advertising
This manual is related to the following products: