Toshiba MW30G71 - Manual (Page 45)

45
TV operation
Selecting the HDMI audio input source/
Resetting your audio adjustments
See page 17 for details on connecting an HDMI or a DVI device to the TV’s HDMI input. If you
connect a DVI device, to hear audio you must also connect the analog audio cables to the
HDMI audio IN jacks (see page 17.) Set the HDMI audio input setting to “DVI” with this
connection. If you connect an HDMI device and play media with digital audio output, to hear
digital audio set the HDMI audio input setting to “HDMI” with this connection. If you connect an
HDMI device but play media with analog audio output (for example, certain CDVs do not
output digital audio), to hear audio you must also connect the analog audio cables to the HDMI
audio IN jacks (see page 17.) Set the HDMI audio input setting to “DVI” with this connection.
Press MENU in the TV/VCR mode, and then
press
or to select AUDIO menu.
1
Selecting the HDMI audio input source
Press or to select “HDMI”. 2
Press or to select “HDMI” or “DVI”. 3
MENU
/ / /
Resetting your audio adjustments
Press MENU in the TV/VCR mode, and then
press
or to select AUDIO menu.
1
Press or to select “RESET”, and then
press .
2
The RESET function returns the audio adjustments to
the following factory settings:
Bass ................. center (25)
Treble ............... center (25)
Balance .............. center (0)
AUDIO
SAP OFF
BASS 25
TREBLE 25
BALANCE 2 0
STABLE SOUND OFF
SURROUND OFF
HDMI HDMI
RESET
: SELECT : ADJUST
RETURN : END