Toshiba Multifunctional Digital System GA-1190 - Manual (Page 40)

5 APPENDIX
38 Troubleshooting at Network Printing Setups
IPP printing in a Windows operating system environment:
Printing via print server in a Windows operating system environment:
No. Check Item Yes No Countermeasure
1 Are the IP Address proper-
ties correctly set? Next Step Set up the IP address correctly.
2 Is the HTTP Server on this
equipment enabled? Next Step Enable the HTTP server in the
HTTP Network Service.
3 Is the IPP Printing correctly
set? Next Step Set up the IPP print service cor-
rectly.
4 Were the proper printer driv-
ers installed? Next Step See the Printing Guide to install
proper printer drivers.
5 Is the IPP port configured
with correct URL? Next Step See the Printing Guide to config-
ure proper port.
6 Can you print to this equip-
ment?
End
Refer to the following section to
troubleshoot the condition.
P.47 “Cannot print data to this
equipment”
No. Check Item Yes No Countermeasure
1 Are the IP Address proper-
ties correctly set? Next Step Set up the IP address correctly.
2 Is the Raw TCP Printing
correctly set? Next Step Set up the Raw TCP print service
correctly.
3 Is the LPR/LPD Printing cor-
rectly set? Next Step Set up the LPD print service cor-
rectly.
4 Were the proper printer driv-
ers installed? Next Step See the Printing Guide to install
proper printer drivers.
5 Is the Raw TCP or LPR port
configured with correct IP
address?
Next Step
See the Printing Guide to config-
ure the proper port.
6 Is the Windows print server
correctly set? Next Step Set up the Windows print server
correctly.
7 Can you print to this equip-
ment?
End
Refer to the following section to
troubleshoot the condition.
P.47 “Cannot print data to this
equipment”