Transition Networks SISGM1040-244 - Manual (Page 36)

Transition Networks SISGM1040-244
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
CLI command interface
The following table lists the CLI commands and description.
Commands Level
Modes
Access
Method
Prompt
Exit
Method
About This Mode1
User EXEC
Begin a
session with
your switch.
switch>
Enter logout
or quit.
The user commands
available at the user
level are a subset of
those available at the
privileged level.
Use this mode to
• Perform basic tests.
•Displays system
information.
Privileged
EXEC
Enter the
enable
command
while in user
EXEC mode.
switch#
Enter
disable to
exit.
The privileged
command is advance
mode
Privileged this mode to
•Displays advance
function status
• Save configures
Global
Configuration
Enter the
configure
command
while in
privileged
EXEC mode.
switch
(config)#
To exit to
privileged
EXEC
mode, enter
exit or end
Use this mode to
configure parameters
that apply to your
switch as a whole.
VLAN
database
Enter the vlan
database
switch
(vlan)#
To exit to
user EXEC
Use this mode to
configure