Transition Networks SISGM1040-244 - Manual (Page 55)

Transition Networks SISGM1040-244
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
information fastEthernet 2
switch(config-if)#show monitor
no monitor I Disable source port of
monitor function
switch(config)#interface
fastEthernet 2
switch(config-if)#no monitor
802.1x Commands Set
Commands Level Description Example
8021x enable G Use the 802.1x global
configuration
command to enable
802.1x protocols.
switch(config)# 8021x enable
8021x system radiusip
[IP address]
G Use the 802.1x system
radius IP global
configuration
command to change
the radius server IP.
switch(config)# 8021x system
radiusip 192.168.1.1
8021x system serverport
[port ID]
G Use the 802.1x system
server port global
configuration
command to change
the radius server port
switch(config)# 8021x system
serverport 1815
8021x system
accountport
[port ID]
G Use the 802.1x system
account port global
configuration
command to change
the accounting port
switch(config)# 8021x system
accountport 1816
8021x system sharekey
[ID]
G Use the 802.1x system
share key global
configuration
command to change
switch(config)# 8021x system
sharekey 123456