Transition Networks SISGM1040-244 - Manual (Page 88)

Transition Networks SISGM1040-244
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
DMI interface
Port 5 to port 8 support DMI function. The DMI table shows five parameters and four
warning and alarm indicators. All of these warning and alarm were defined and
evaluated by SFP transceiver with DMI function.
And then, click
Apply
to apply the settings
VLAN configuration
A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain,
which would allow you to isolate network traffic, so only the members of the VLAN will
receive traffic from the same members of VLAN. Basically, creating a VLAN from a switch
is logically equivalent of reconnecting a group of network devices to another Layer 2
switch. However, all the network devices are still plugged into the same switch physically.
The industrial switch supports port-based and 802.1Q (tagged-based) VLAN. The default
configuration of VLAN operation mode is Disable.