Tasco 1575 - Manual (Page 14)

EYEPIECE HOUSING FOR HAYWARD 7X50 BINOCS
Rare left side metal eyepiece housing for the military
Hayward 7X50 binoculars. This sure is a find if you can
use it. 3-1/2" long by 2-1/2" wide. Opening for the
optics is 1". Has (3) 1" long legs. If you repair binocu-
lars, you need a few of these. Unused
B1032 $12.50
N NEEW W!! UNIVERSAL 6X30 BINOCULAR EYE GUARDS/CUPS FOR M9
These were made for the M9 military 6x30 binocular
but will fit numerous other 6x30's. The top is 33mm
diameter (opening is 16mm), the bottom threaded
inside barrel measures 21mm. 10mm thick.
B1033 $1.25 or 10 for $10.00
N NEEW W!! PRISM SHELF/HOLDER FOR M15 & M16 7X50 BINOCULARS
Need a replacement prism holder for your 7x50 binocu-
lars? This is exactly what you need! Will fit many of
the 7x50's, but was made for the M15 & M16. Prism
bracket included to securely hold you prisms in place.
B1034 $3.00
N NEEW W!! UNUSED WWII 7X50 BINOCULAR BODY/SHELL RIGHT SIDE
These make great replacements for your damaged
7x50's (they fit B&L WWII binocs) or to make a quali-
ty monoscope. In mint original condition! Measures 5-
3/4" long, quality machined pieces!
B1035 $15.50
N NEEW W!! 7X50 WWII BINOCULAR EYE GUARD
These will fit many of the 7x50 WWII binoculars (as
well as modern brands). The top is 35mm diameter
(opening is 22mm), bottom threaded barrel is 31mm.
9mm thick.
B1036 $1.50 or 10 for $12.00
Page 12 - Binocular Parts To Order, call toll free: 1-877-7SURPLUS