Tasco 1575 User Manual
Page 31
TWO POSITION HEAVY DUTY TOGGLE SWITCH
Two position toggle switch made by Eaton Corporation.
Part number is 8951K163. Specification ranges are 10A
250VAC and 15A 125VAC with 4 contact connections.
Nice large, red switch is 3/4" long x 1/2" wide with 2
hole mounting bracket. Switch is 2" long from mounting
bracket to mounting bracket and is 1" deep. Unused.
M2162 $2.00
SWITCHCRAFT 2 POSITION DPDT SLIDER SWITCH
Switchcraft 2 position switch operates at 3A 125vac or
.5A at 125vdc. Aluminum housing is 1 3/8" long x 3/4"
wide with 2 mounting holes. Has 9 copper contacts on
rear of switch. Throw is black and 5/16" long. Unused.
M2166 $0.75 or 10 for $5.00
LIGHTED 3-COLOR, 3-POSITION SWITCH
Measuring 3" deep x 3/4" wide, this well-constructed
switch appears to be constructed for DC operation.
It's composed of a zinc frame, opaque three-position
flip lever with a small red, yellow, and green filter
attached to be rear, in front of a 1/2" long x 3/16"
wide bulb (up=green, center=yellow, down=red). The
lever is held in position by a series of insulated spring
steel tabs that each have a solder terminal in the rear of the switch. The
switch front panel has two 1mm threaded mounting holes.
M2186 $3.50
LEVITON 125/250VAC TURN SWITCH
Two position switch, measuring 20mm
long x 18mm wide x 30mm total depth
(20mm mast height). Threaded for
mounting in a 10mm hole, includes mount-
ing hex nut and connection wiring (approx.
5" black, 25" red). Rated 3A @ 125V, 1A @ 250V,
1A @ 125VT.
M2188 $0.75 or 10 for $6.00
Electrical Components - Page 29
Surplus Shed – www.SurplusShed.com