Trane XT300C User Manual
Page 15
15
Pub. No. 22-5127-04
69-1214
The temporary temperature setting you select displays for approximately 3 seconds. The display reads
Temporary until the next period begins, or you cancel the Hold.
IMPORTANT
To cancel the Hold before the designated
time, press Run Program.
After selecting a temporary setting, display reads Temporary until canceled.
Example displays shows temporary heat setting of 70
°
at 6:00 AM.
Run
Program
M12984
Auto
Fan
Mon
AM
Temporary
Heat
System
Heat
NOTE:
If “▲” or “▼” appears under the temperature display, it means that both the heating and cooling
setpoints are being adjusted. Tapping the key changes both the heat and cool setpoints by one degree.
Press
after the desired setpoint is reached to verify the setpoints.
NOTE:
While in temporary operation, the thermostat uses conventional recovery for that period only. The
thermostat assumes you desire to maintain the temporary setting until the end of the period.