Trane XT300C - Manual (Page 31)

31
Pub. No. 22-5127-04
69-1214
Setting System and Fan
The system default setting is Heat and the fan default setting is Auto. Use the System and Fan keys to change
the settings. The fan settings can be set for each schedule period individually. The system selection is for all the
schedule periods.
Set System
Press System until the desired system displays
(Heat, Off, Cool, or Auto).
Heat: The thermostat controls the heating.
Off: Both the heating and cooling are off.
Cool: The thermostat controls the cooling.
Auto: The thermostat automatically changes
between heating and cooling operation,
depending on the indoor temperature.
M17054
System
Heat Off Auto Cool
M17055
Auto
Fan
On
System
Fan
Set Fan
Press Fan until the desired mode displays
(On or Auto).
On: Fan operates continuously.
Auto: Fan operates only when heating
or cooling.