Effect edit, Controller edit, Effect – Technics sx-PR604/M User Manual
Page 118: Controller, Part ix sound edit
Effect Edit
These are settings related to the various effects applied to your edited sound.
EFFECT
1.
On the SOUND EDIT menu display, select
EFFECT.
• The display looks similar to the following.
2.
Use the respective CHORUS
∧
and
∨
buttons
to specify how the CHORUS is applied.
3.
Use the REVERB ADJUST
∧
and
∨
buttons
to specify how the REVERB is applied.
4.
Use the MONO/POLY
∧
and
∨
buttons to
select the sound output mode.
5.
MONO: Use the PORTAMENTO ON/OFF but-
tons set portamento to on or off. Use the TIME
∧
and
∨
buttons to set the portamento time.
DIGITAL EFFECT
1.
Use the PAGE buttons to view the 2/2 display.
• The display looks similar to the following.
• The display for the effect type which is best-suited for the
sound currently being edited is selected.
2.
Use the TYPE
∧
and
∨
buttons to select the
type of effect.
<ON/OFF button>
Specify whether the DIGITAL EFFECT button turns on or
off when the sound is selected. When set to ON, the DIG-
ITAL EFFECT button turns on automatically when the
sound is selected.
<STEREO/MONO button>
Select stereo (STEREO) or monaural (MONO) output of
the effect.
3.
Use the buttons along the bottom of the display
to select the attribute you wish to adjust.
• When the type is changed, the parameters revert to the
factory defaults.
Controller Edit
Specify how operation of the controllers, such as the wheels, etc., affects the sound.
•
These settings are effective when the instrument recieves controller data.
CONTROLLER
1.
On the SOUND EDIT menu display, select
CONTROLLER.
• The display looks similar to the following.
2.
Use the buttons to the left of the display to
select a controller.
• Two functions can be assigned to each controller.
3.
Use the FUNCTION
∧
and
∨
buttons to select
a function for the controller.
4.
Use the DEPTH
∧
and
∨
buttons to set the
depth of the function applied by the controller.
5.
Use the TONE ENABLE ON/OFF
∧
and
∨
buttons to set the controller to on or off for
each tone.
• When set to INV, the effect is applied inversely.
6.
Repeat steps 2 to 5 for the other controllers,
as desired.
7.
Use the GLIDE
∧
and
∨
buttons to select
whether or not the glide effect is active.
ENABLE:
The glide effect is enabled.
DISABLE:
The glide effect is disabled.
S
o
un
d E
d
it
Part IX
Sound Edit
118
QQTG0665