Measure copy, Measure erase, Measure delete – Technics sx-PR604/M User Manual

Page 81: Part iv sequencer

Advertising
background image

MEASURE COPY

Copy recorded data of specified measures to a specified
point.

• On the destination track, the new data replaces the current

measure contents.

1.

Specify the measures you wish to copy from
the source track (FROM).

• On the FROM side, specify the settings with the corre-

sponding buttons.

TRACK: Specify the track number you wish to copy the

measures from.

• You cannot select the track for the RHYTHM part or

CHORD part in which a repeat command has been
stored.

• If ALL is selected, the specified measures are copied

to all tracks at the same time.

FIRST MEAS: Specify the first measure to copy.
LAST MEAS: Specify the last measure to copy.

2.

Specify where you wish to copy the selected
measures to.

• On the TO side, specify the settings with the correspond-

ing buttons.
TRACK: Specify the track number you wish to copy to.

• Measures in a track for the CONTROL, RHYTHM or

CHORD part can be copied only to the same track.

START MEAS: Specify the start point to copy the selected

measures to.

REPEAT: Specify the number of times the selected meas-

ures are to be repeated.

3.

Press the OK button.

• The confirmation display appears. Press the YES button

to execute the function, or press the NO button to cancel
the function.

• Note that if the END command is included in the source

data, it is also copied. Any data following the END com-
mand is not copied.

MEASURE ERASE

Erase the recorded contents of specific measures. You can
also specify which type of data is to be erased.
• Note that only the contents of the measures are erased,

not the measures themselves; the length of the perform-
ance remains the same.

1.

Use the TRACK

∧

and

∨

buttons to specify

the track number.

• This function does not work for the RHYTHM part or

CHORD part in which a repeat command has been stored.

• If ALL is selected, data is erased from the specified

measures of all the tracks at one time.

2.

Use the FIRST MEASURE

∧

and

∨

buttons

to specify the start point (measure number).

3.

Use the LAST MEASURE

∧

and

∨

buttons to

specify the end point (measure number).

4.

Use the ERASE DATA

∧

and

∨

buttons to

specify the type of data to be erased.

ALL: All data is erased.
NOTE: Only note data is erased.
CONTROL: Only control data (volume, effect and other

panel settings as well as selection changes) is erased.

5.

Press the OK button.

• The confirmation display appears. Press the YES button

to execute the function, or press the NO button to cancel
the function.

MEASURE DELETE

Delete specified measures from a track.

• The length of the performance accordingly decreases by

the number of deleted measures.

1.

Use the TRACK

∧

and

∨

buttons to select the

track from which measures are to be deleted.

• This function does not work for the CHORD or RHYTHM

track in which the repeat function has been stored.

• If ALL is selected, the specified measures are deleted

from all the tracks at one time.

2.

Use the FIRST MEASURE

∧

and

∨

buttons,

to specify the first measure to delete.

3.

Use the LAST MEASURE

∧

and

∨

buttons to

specify the last measure to delete.

4.

Press the OK button.

• The confirmation display appears. Press the YES button

to execute the function, or press the NO button to cancel
the function.

Se

q

u

e

n

c

e

r

Part IV

Sequencer

81

QQTG0665

Advertising
This manual is related to the following products: