Troy-Bilt 2-Cycle Gasoline Trimmer/Brushcutter TB90BC User Manual
Page 7
7
For edging (when using
the line head cutting
attachment with EZ-
Link™ models), lock the
release button of the
cutting attachment into
the 90° edging hole
(Fig. 18).
OPERATING THE EZ-LINk™ SYSTEM
The EZ-Link™ system enables the use of these optional Add-Ons:
Cultivator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GC720
Edger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LE720
Hedge Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AH720*
Straight Shaft Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . SS720
Turbo Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TB720
Pole Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS720*
Brushcutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BC720*
*Do NOT use this attachment with an electric powered
product.
Removing the Cutting Attachment or Add-On
1.
Turn the knob counterclockwise to loosen (Fig. 16).
2.
Press and hold the release button (Fig. 16).
3.
While firmly holding the upper shaft housing, pull the cutting
attachment or add-on straight out of the EZ-Link™ coupler
(Fig. 17).
Installing the Cutting Attachment or Add-On
NOTE: Place the unit on the ground or on a work bench to
make add-on installation or removal easier.
1.
Turn knob counterclockwise to loosen (Fig. 16).
Fig. 16
EZ-Link™ Coupler
Release Button
Guide Recess
Knob
Primary Hole
Upper Shaft Housing
EZ-Link™ Coupler
2.
While firmly holding the add-on, push it straight into the
EZ-Link™ coupler (Fig. 17).
NOTE: Aligning the release button with the guide recess will
help installation (Fig. 16).
3.
Turn the knob clockwise to tighten (Fig. 18).
Fig. 17
Fig. 18
Knob
Lower Shaft Housing
Release Button
90˚ Edging Hole
(Trimmer Only)
CAUTION:
Lock the release button in the
primary hole and securely tighten the knob before
operating this unit.
WARNING:
To avoid serious personal injury and
damage to the unit, shut the unit off before
removing or installing add-ons.
CAUTION:
Add-ons are to be used in the
primary hole only. Using the wrong hole could
lead to personal injury or damage to the unit.
WARNING:
When using any attachment, read
and understand that attachment’s specific manual
before you begin operation. Follow all applicable
safety information.
ASSEMBLY INSTRUCTIONS