Toshiba Pocket PC e750 - Manual (Page 177)

ATI Presentation Pack
User's Manual 11-5
TOSHIBA Pocket PC e750 Version
1
Last Saved on 02/05/2003 17:16
ENGLISH using Euro_M.dot –– Printed on 02/05/2003 as HDA51PX1T80
Notes Page
Notes Page view displays the current slide content in the upper pane,
with the lower pane displaying the speaker notes that were entered for
the original PowerPoint presentation, or entered/edited in IA Presenter.
The upper pane operation is the same as in Normal view. The lower pane
is both a Notes display window and an editing window. After editing a
Note, tap OK in the upper right corner to save it.
When in Notes Page view mode, you can project the currently-selected
slide to VGA output by activating the VGA Slide Toggle command on the
View Menu, or by tapping the VGA Slide Output Toggle icon at the
rightmost side of the Toolbar. To end the projection and return to viewing
the slide only on your mobile device screen, just select the command
again to toggle it off.
Quick Notes
The Quick Notes command on the View Menu (and the Quick Notes View
icon on the Toolbar) gives you a view mode that combines the thumbnail
images of Slide Sorter view with the Notes pane of the Notes Page view.
When you tap on a thumbnail, a border around it indicates it is selected.
You can also use the Up, Down, Left, or Right buttons on your mobile
device to move the selection focus (or the Slide Title Bar, if you chose to
display it).
The lower pane displays the Speaker Notes that were entered for the
original PowerPoint presentation, or entered/edited in IA Presenter. The
lower pane is both a Notes display window and an editing window. Tap in
the lower pane to start editing a Speaker Note. The editing functionality is
the same as for Notes Page view.
If the Cut/Copy/Paste/Clear/Undo/Select All commands are required
for editing the text, press your stylus within the Notes pane to activate the
pop-up editing menu. The Notes-editing operation can be undone by
selecting the multiple-steps Undo command on the Edit Menu, pop-up
menu, or Toolbar.
Slide Show
The Slide Show command on the View Menu starts a full screen Slide
Show on the Pocket PC’s LCD screen. (If you want to project the slide
show to VGA output, you must use the VGA Slide Show command.)
Before selecting Slide Show or VGA Slide Show, you should select Set
Up Show...
from the Tools Menu to set up the desired behavior for your
slide show.
If the Auto-Rotate option is checked in the Tools > Options > Display
tab, the slide will be automatically rotated according to the direction you
choose (Left or Right).
Depending on the slide advancement setting specified in the Slide
Transition dialog box, you can tap to advance the slide (or the next
animated object); use the navigation (arrows) buttons of your Pocket PC
to advance/ back play the slides; or, IA Presenter will automatically
advance slides based on the number of seconds (delaytime) you set.
Sound effects will also be played according to your assignment.