Wireless led descriptions – Toshiba Pocket PC e750 User Manual
Page 28
Basic Skills
User's Manual
2-5
TOSHIBA Pocket PC e750
Version
1
Last Saved on 02/05/2003 17:16
ENGLISH using Euro_M.dot –– Printed on 02/05/2003 as HDA51PX1T80
Wireless Communication Switch (Wireless LAN/Bluetooth
model only)
1.
To enable Wireless module, make sure the Wireless Communication
Switch is turned on. (The default setting is Power Off. Slide the switch
to the left to turn the power on.)
2.
If this is your first time turning on the switch, the IP Address Page will
pop up for you to set the IP address, Subnet mask and Default
gateway.
Wireless LED Descriptions
LED indicates the different status:
Off
Wireless Communication Switch is turned OFF
Orange
Wireless Communication Switch is turned ON
Wireless Communication Switch
(On
←→ Off)