Toshiba Strata CTX - Manual (Page 110)

IPT1020-SD Settings
Initializing the IPT1020-SD
96
Strata CTX DKT/IPT Telephone 11/03
Initializing the IPT1020-SD
CAUTION! If you initialize the IP telephone, all settings return to default.
1. Press  +  + + +ROG (simultaneously).
2. Press 9RO ▲.
3. Press )% to initialize the telephone’s function settings (LED On = initialize,
LED Off = don’t initialize). See “IPT1020-SD Function Settings” on page 99 for
details.
4. Press )% to initialize LCD contrast setting (LED On = initialize, LED OFF =
don’t initialize).
5. Press )% to initialize the telephone’s IP network connection settings (LED On =
initialize, LED Off = don’t initialize). See “IPT-to-IP Network Connection
Instructions” below for details.
6. Press +ROG again to complete the initialization process.
7. Go off-hook and hang up.
IPT-to-IP Network Connection Instructions
1. Press

+

+ +
+ROG
(simultaneously).
2. Press  , then press +ROG to select the Network Setting Mode.
3. Press )% to see if the DHCP server is in use or not. Press one of the following
(normally, use  : manual setting):
 : manual setting, then press +ROG .
 : auto setting by DHCP server, then press +ROG .
4. Press )% . Enter the IP address for this IPT and press +ROG . To enter the period in
an IP address, press the button on your dialpad (e.g., if the IP address is
“192.168.1.241,” press      ).
5. Press )% . Enter the subnet mask number and press +ROG . (e.g., if the subnet
mask address is “255.255.255.0, press     ).