Toshiba Strata CTX - Manual (Page 112)

IPT1020-SD Settings
IPT-to-IP Network Connection Instructions
98
Strata CTX DKT/IPT Telephone 11/03
IP Telephone Start Up Sequence
After the IP telephone network setting has been programmed, the following displays
occur after the IP telephone is hung-up:
Action LCD Indication Remarks
1. IPT
initializes.
2. IPT
searches
for IP
address. Possible errors:
• IP address is not
set.
• No DHCP server,
etc.
If error occurs, IP address setting is carried out
continuously.
3. IPT
searches
for BIPU. Retries every 10 seconds.
Possible errors:
• BIPU is not found
“time out.”
• BIPU is not found
(Station ID
automatic setting).
• BIPU is not found
(StationID manual
setting)
• Multicast address is
not registered
(BIPU IP address
setting mode is automatic setting by multicast)
• BIPU IP address is
not registered
(BIPU IP address
setting mode is manual setting.
INITIALIZING
PLEASE WAIT...
IPaddress setting...
IPaddress setting...
Can’t set IPaddress
Searching BIPU...
Searching BIPU..
BIPU not found
Searching BIPU..
Can’t get StationID
Searching BIPU..
StationID unmatch
Not exist Multicast addr
Not exist BIPU address